2Thumb Putter Grip Fitting Instructions

		Stage 1
		Secure club in vice below grip. Using utility knife, remove off grip and tape. Clean shaft with solvent. (White spirit or similar)

		Stage 2
		Apply double-sided tape, leave 1/4" overhang at butt end. Smooth and remove backing. Tuck in overhang

		Stage 3
		Apply solvent generously over tape. Squirt liberally inside grip. Shake to distribute.

		Stage 4
		Pour excess solvent from grip over entire taped surface.

		Stage 5
		Align grip with clubface. Push grip quickly on shaft unti fully seated against shaft end.

		Stage 6
		Remove from vice. Make final alignment adjustments. Wipe clean. Allow to dry for 24 Hours.